Beyond stumpage

Standing trees have many values, including that of a revenue generator. Wood drives an important part of Michigan’s economy and most of the wood is owned by families and individuals.

The dollar value of timber is one of the more common queries from family forest owners. It is a very good question, but not easily answered for a variety of reasons.

The monetary value of standing timber is called stumpage; this is what the timber owner gets paid by the logging contractor. Stumpage varies with species, tree size, tree quality, stand composition, stand volume, landowner objectives, site access, market access, geographical region, season, weather and a host of other factors.

Trees are a source of raw wood material. The logger manufactures the trees into a product useable by a mill. The margin between stumpage and mill prices is where the logger makes a living, if possible. Small volumes of wood are the most difficult to move commercially, unless the trees have exceptional quality.

Stumpage values can range from zero to over $1000 per thousand board feet. A single timber sale might net tens of thousands of dollars for a landowner. There is no statewide “blue book” or look-up table for stumpage values in a specific forest. However, there are a couple of tracking services by ownership or across the Lake States. They provide ballpark estimates for certain commercial tree species and products. For example, sugar maple veneer logs command high prices, but scrub oak and ironwood pulpwood may not be marketable at all.

There are four basic products manufactured from trees: veneer, sawlogs, pulpwood and chips. Veneer and sawlogs have many sets of specifications, which can complicate pricing. Many sawlogs have grades, with somewhat regular price ranges. However, there are different scales for different species. Veneer specifications are often peculiar to a mill and quite market-sensitive.

Most commonly, timber is bought in volume units of either cords or 1000 board feet (MBF). A cord is a stack of 8-foot logs, usually pulpwood, which runs 4 feet high and 4 feet wide. A board foot is the equivalent of a piece of wood 1 inch thick and 12 by 12 inches. Board foot volume is an estimate of the lumber inside a log or tree. It does not include all of the wood in a log or tree. Lumber excludes wood volume that gets slabbed-off at the mill or becomes dust as the saw blade cuts through the wood.

So, how do landowners learn the value of their stumpage?

Three basic ways will unveil stumpage values in a specific stand of timber. The recent sale of a similar stand close by might be a good indicator, especially if the timber sale was a simple one, such as an aspen clear-cut. If this example is relevant to you, talk to your neighbors. Second, timber buyers offer free estimates and can often buy timber on the spot. The catch is that they work for a company, not for you. Also, one buyer may make an offer based on a different set of trees than another, and this can be confusing to a landowner. Lastly, you can hire a professional forester to help guide you through the process.

People familiar with timber values, or who are not overly concerned about obtaining top dollar, will often use one of the first two methods. They work fine and many landowners are satisfied with the resulting sale. Word about reputable loggers travels well by word-of-mouth.

However, most people are unfamiliar with forest ecology and timber values but want to receive top dollar and protect forest quality. A professional forester, often a consulting forester, fills this role. They work for the landowner and are familiar with area logging contractors and mills.

According to a Michigan State University Extension educator, a consultant will work with your objectives and prepare a strategic plan to get there. Timber sales are often a key element of a forest management plan. The consultant will work with both you and logging contractors to make sure a harvest follows the approved forest prescriptions. Always use a contract and know what should be in the contract.

Most times, there are many facets to a timber sale. Which trees? What method of harvest? When? Why? What about roads and landings? Wildlife habitat impacts? Visual quality? Income tax implications? Keep in mind that the highest bid might not be the best option. Many times, a logger will make concessions that reduce the stumpage value, such as building a road or agreeing to a more challenging harvest practice. A timber sale can go along way to achieving a wide range of management objectives.

For most people, a timber sale is a once-in-a-lifetime experience. If you’re concerned about the future forest, then get the job done right. A timber sale is often a whole lot more than just cutting trees down.

Did you find this article useful?

You Might Also Be Interested In